While you are researching mitsubishi fgc 70 k stc 7000kg counterbalance forklift in and around scotland check the state of the forks on any second hand forklift you look at. Bent forks may need to be replaced. The best way to check this is simply to put the mast in a vertical position and lower the forks to the floor. Once at the floor use a tape to check that both fork tips are the same height from the ground.

Whilst trying to find mitsubishi fgc 70 k stc 7000kg counterbalance forklift in and around scotland be aware that a DIY shop was fined over £500,000 plus costs of £250,000 as a result of an accident in which a female customer was killed when a forklift reversed into her. The forklift driver had been working without a look-out and as a result had not seen the customer.

While investigating mitsubishi fgc 70 k stc 7000kg counterbalance forklift in and around scotland take into account the physical restrictions of the areas in which a machine will have to operate. In particular consider any doorways through which your forklift will have to move. If your doorways are standard 1.8m (6ft) or 2.4m (8ft) high then you obviously wont be able to use a machine with a collapsed mast height of over 3m (10ft). Before making your selection make sure that all the doorways and openings that it will need to fit through have been measured.